Monthly Archives: August 2017

Remoting via SmartSDR and SmartLink v2.0 – Both my Stations are UP!!

One of my “Dreams” I contemplated when the Flex-6000 (Deep Impact, right?) was announced was the idea that I could control more than one of my own stations remotely.

I forgot to shoot a screen shot, as I was able to sit in the W9EVT Mega-Shack receiving the stations I worked, while alternatingly working them from my North and South Stations!

When I got back to the North Station I did shoot this screen shot the next morning:

SmartLink doing both of my Stations

Let’s walk through the four entries:

  1. K9ZW Home (South) QTH via SmartLink – this is in Manitowoc, Wisconsin running a Flex-6700 Limited Edition (#11) barefoot to a Tennadyne T-8 at 60ft.
  2. K9ZW Island (North) QTH via SmartLink – this is on Washington Island, Wisconsin (hence the WI-001L) running a later Flex-6700 barefoot to a SteppIR CrankIR portable antenna.
  3. K9ZW Island (North) QTH via Local Area Network is the same station and shows because I within the wireless router’s coverage.
  4. Demo Flex-6700 is built into SmartSDR for iOS, and I keep it enabled to do quick show-and-tell sessions where I don’t have good internet set up.

So what I was doing was using George W9EVT’s Maestro and Flex-6300 to listen as I switch back-and forth from the North and South stations.  I was also monitoring via those stations as well.

The North and South stations are roughly 190 km/118 miles apart in a largely north(NNE)-south(SSW) displacement.  The roads are slow and a ferry ride make this a 3+ hour trip each way.

K9ZW South to K9ZW North – 24 degrees

Very interesting experiment which I hope to repeat!

Next step may come in the future, as I would love to combine the two stations in one virtual-station!

73

Steve
K9ZW