Monthly Archives: February 2014

New K9ZW Custom QSL Cards by Jeff K1NSS

Just finished today is the design phase of a trio of new QSL card designs commissioned from Jeff K1NSS.

I’ve segmented my operating QSOs recently into those where I’ve been on my new Flex-6700, those where I’ve been using vintage gear, and those made from my frequent visits on Washington Island.

Jeff K1NSS Eyeball QSO Card Designs for K9ZW

Jeff K1NSS Eyeball QSO Card Designs for K9ZW

Jeff K1NSS was brought to my attention as an illustrator and featured name in the K9YA Club Newsletter and by word of mouth.

We exchanged a few emails working out a strategy to a portfolio of designs, each with print and web versions, plus a coordinated Eyeball QSO Card.

Jeff has great talents suggesting viable themes and asking great questions to draw out what I was hoping for.

The Flex-6700 feature reflects the “magic decoder ring” that this piece of SDR equipment has brought to my operations. If you receive the full actual card there are “Easter Eggs” hidden in the design.

A “Voice of Steve” card seemed a natural to give a feel for the reverence of operating with vintage gear. I’ve gear spanning the WWII period onwards which I put to use when I can.

The third segmentation are those QSOs I make as a guest at the George Ulm W9EVT mega-shack at Greengate Farm on Washington Island, Wisconsin. The card gives tribute to this significant radio operation and also a way to highlight any other Washington Island QSO I make.

The reduced designs are the Eyeball QSO Cards illustrated. Eyeball QSO Cards is an Amateur’s way to say “calling card” and have taken the full card themes in a form adjusted for the purpose.

A highly rewarding experience, the process was a lot of fun! I spent more with Jeff than many of his projects, as I asked him to do not only the three designs, but also a WI9DX Washington Island DX Club version and a club member version of that card as well.

Oh and I asked him to do custom reverse sides to blend with the cards designs.

I’ll trickle some examples on the blog over the next few weeks.

Hope you like them as much as I do!



Tagged , , , , ,

SmartSDR v1.1 – Another New Radio in a Download

A Seven Band Look via SmartSDR V1.1

A Seven Band Look via SmartSDR V1.1

FRS delivers and then some!

More than just revised and improved!

It is as if a whole brand new radio was dropped off.

The screen shot, by the way, is the radio being run via wireless from an iMac using Win7/74 under Parallels.  The base machine is running OS-X Mavericks.

I could have opened another Slice, except I had “wasted one” fiddling from my WinXP box and iPad Air (Air running K6TU’s App) and didn’t feel like rebooting to clean up my mistake.



Tagged , , , , ,

FlexRadio System – Major SmartSDR Update/Upgrade

This is easiest left in FRS’s own words:


SmartSDRTM v1.1 Available On Time and Exceeding Promised Feature Set

FlexRadio Systems is pleased to announce the availability of SmartSDRTM v1.1.  SmartSDR v1.1 for both the FLEX-6500 and FLEX-6700 contains a wealth of new features – a number of which are over and above those promised in the public roadmap.  In the installation package are the release notes, which have important information about the features and caveats that are important to know.  Please read the release notes, as there are several important notices with v1.1.  Our team has worked hard to provide not only the features promised with v1.1, but also many new features that we feel will enhance your operation and provide more fun for your operation.  Here’s a partial list of the new features we are releasing with SmartSDR v1.1:

Double the number of panadapters and receivers for a total of four (4) of each for the FLEX-6500 and eight (8) for the FLEX-6700.  With more panadapters you will be able to simultaneously view up to 4/8 bands at once to monitor band conditions.  Increased slices opens the opportunity to monitor digital portions of multiple bands or the same band, have multiple receivers setup to work liaison on HF nets with multiple stations, etc.

Digital Audio eXchange (DAX) for seamless support of 3rd party digital programs.  With DAX, digital sample streams are routed directly from the radio to your PC and made available on DAX channels.  Much of the confusion about cable numbers and which virtual cable belongs to which receiver and transmitter is gone.  Each DAX channel is clearly labeled appropriately such as “DAX Audio RX 1” and “DAX Audio TX 1”.  Each slice can be routed to a DAX channel on the fly in the SmartSDR client and all of the channels are created for you on installation of SmartSDR.

Promised with SmartSDR’s introduction was up to two simultaneous digital channels for digital software out of the radio.  We are pleased to announce that every slice receiver in SmartSDR has the capability to run DAX simultaneous to other receivers.  So on a FLEX-6500, up to four (4) DAX Audio channels may be run at once and on the FLEX-6700, up to eight (8) DAX Audio channels may be run at once.

DAXIQ streams added for wide-band data output.  In addition, with SmartSDR we promised DAXIQ streaming of I/Q samples at up to 96ksps (96kHz).  We’re pleased to announce that we have DAXIQ streaming running at up to 192ksps in v1.1.  For v1.1, we have DAXIQ streaming at your choice of 24, 48, 96 or 192ksps.  You may have up to four (4) total streams running simultaneously, but only up to a combined output rate of 384ksps today.  This allows you to run 96kHz of four bands into CW Skimmer from a single radio.

Both DAX and DAXIQ are network clients and may be used on multiple PCs on the network.  That means that you can run multiple digital mode applications all talking to the same radio but using different bands and modes at the same time and on different computers if desired.  We believe this is ground-breaking technology for amateur radio.

New filtering algorithms with sharper filters in all modes plus lower latency for digital modes. With SmartSDR v1.1, we are introducing variable sharpness filters which offer the best filtering when needed to eliminate incursion of sideband splatter from adjacent channels or very narrow CW filters, but also relaxes for lower latency with wider CW filters and latency-sensitive digital modes such as PACTOR.  The filter sharpness is automatically selected based on operational mode and filter width as selected by the operator.

Active Slice Control Panel.  A new Active Slice Control panel has been added to the right side of SmartSDR for Windows giving you immediate access to most slice controls in a single location without having to open up slice panels.  This allows the operator to collapse all slice panels and operate receivers entirely from the Active Slice Panel which will follow the selected slice receiver.

Tabbed control panels in SmartSDR.  All control panels on the right of SmartSDR are now under a tabbed control that lets you add or remove these panels at will.  In addition, you may rearrange the panels by dragging them to a desired location.  This lets you customize the layout of the SmartSDR control surface to match your preferred operational environment.

Advanced SmartSDR Persistence memorizes previous states.  Persistence capabilities in SmartSDR now remember key details about your operation on each amateur band.  Power, filter, and slice settings, panadapter levels, etc. are all remembered by amateur band so returning to the band later will quickly restore all the values back to their previous settings.  When appropriate, settings such as microphone and CW settings are memorized by mode rather than band or slice.

Enhanced panadapter display averaging.  With SmartSDR v1.1 you have control over both the speed of panadapter updates as well as the degree of averaging on top of the speed.  When reducing the panadapter update rate, all frames are used in the radio for better averaging, but preserving network bandwidth.  The additional averaging control adds a peak-weighted average which emphasizes signal peaks as it smooths out the noise baseline in the panadapter.

CW Audio Peaking Filter.  A new CW Audio Peaking Filter has been added which emphasizes audio signals at the pitch frequency of CW reception.  The APF raises the level of the desired CW signal, adding gain above adjacent signals to help you pick out weak signals in the presence of other signals or noise.

Hardware ALC for external power amplifier operation.  ALC provides a convenient way to reduce the output power of the FLEX-6000 Signature Series transceiver when driving external power amplifiers.

Automatic re-centering of Panadapter on Zoom.  Now when zooming in on a panadapter, the active slice or alternately the closest slice receiver will be re-centered before the zoom to quickly close in on the signals of interest.  Zooming without re-centering is still provided by using a click-drag on the frequency scale at the bottom of the panadapter.

New REMOTE POWER ON capability.  The remote jack on the back of every FLEX-6000 has now been enabled as a method to turn on or off your FLEX-6000 transceiver on or off. Now with a simple relay or external control device, your FLEX-6000 can be started and stopped under your command.

Master oscillator calibration capability.  Each FLEX-6000 Signature Series transceiver has an ultra-low phase noise oscillator for the best low-noise reception.  Unlike other transceivers that must be opened on a periodic basis to adjust the frequency of the master oscillator, SmartSDR now allows frequency calibration with just a software control.  Simply provide a reference signal or use WWV and enable frequency calibration.  SmartSDR will measure the offset and update the master oscillator and store the result to ensure you are always on frequency.

Improved Antenna Switching Logic with broad QSK support.  With new antenna switching logic, every conceivable operating condition has been considered individually and the optimal radio antenna solution that ensures the best operation is now computed automatically by the radio.  Even better support for QSK has been added with this change including support for QRQ QSK up to 100WPM using different receive and transmit antennas.

Updated SmartCAT for increased third party software support.  Several new commands have been added to CAT to support additional software programs and broaden the software that works with the FLEX-6000.

Add RIT/XIT support including operation with FlexControlTM.  Both RIT and XIT have been added including basic operation with the FlexControl.

Improved slice display for narrow band operations (CW, digital modes).  The slice receiver indicators have been updated to include clarity for narrow band modes and some digital modes such as PSK-31.  Key down to RF and slice tone output for CW is world class at less than 8ms.

For more information on this release or to download SmartSDR v1.1 and the associated release notes please visit the FlexRadio Systems website.

Enjoy your new radio!


Your FlexRadio Systems Team


My local (in shack) update is 100% and I am in-process on the iMac update.  Looking awesome!




Tagged , , , , , ,